Masonry restoration is a set of methods, not a single fix: repointing worn mortar joints, replacing broken bricks, cleaning gently, controlling water and, where needed, stabilizing the wall. The right mix depends on why the brick is failing. In Richmond, Virginia, where so many homes and buildings are built of old, soft brick laid in lime mortar, the best methods are the ones that match the original materials and let the wall breathe.
This guide explains each method, what it involves and when it applies. It is written for Richmond homeowners, property managers and owners of historic brick in neighborhoods like the Fan, the Museum District and Monument Avenue.
TL;DR
- Restoration treats the cause of damage, usually moisture, while a simple repair treats only the symptom.
- Repointing with lime-based mortar that is softer than the brick is the core method for old Richmond brick.
- Cracked or spalled bricks are replaced one by one with units that match the original in look and physical properties.
- Clean historic brick with the gentlest method that works. Sandblasting and harsh abrasives are not acceptable.
- Heritage Masonry & Brick offers free estimates, a 5-year guarantee on materials and workmanship, no deposits and payment on completion. Call 804-324-6304.
Table of Contents
- What masonry restoration means
- Start with the cause: moisture
- Repointing with lime mortar
- Replacing damaged brick
- Cleaning brick the gentle way
- Cracks, sealants and water repellents
- Chimneys, steps, patios, walkways and retaining walls
- Restoring historic brick in Richmond, Virginia
- Our point of view on restoration
- Get your brick looked at by Richmond masons
- FAQ
- Sources
What masonry restoration means
A repair fixes one visible problem: a loose brick, a cracked joint, a crumbling step. Restoration looks at the whole wall. It asks where the water is coming from, whether the mortar suits the brick and whether anything is moving. Then it applies the methods that bring the wall back to sound, lasting condition.
According to a 2024 IIBEC paper on masonry restoration strategies, typical exterior wall strategies include:
- repointing
- replacing masonry units
- routing and sealing cracks
- sealant at joints between dissimilar materials
- penetrating water repellent
- restoring or replacing corroded steel
- localized through-wall flashing
- added anchorage or stabilization
Not every wall needs every method. A good mason decides which ones fit after a close look at the brick, the mortar and the way water moves through the building.
The National Park Service offers three guiding rules for historic masonry in its restoration guide. Maintain regularly, because that is the best protection against costly repairs. Repair damaged features rather than replacing them. If replacement is the better option, match the original as closely as possible in design, materials, texture and detail. That is the approach we follow on every Richmond job.
Start with the cause: moisture
Most brick damage in Richmond comes down to water. Rain, humid summers and freeze-thaw cycles in winter all work on old masonry. Before any mortar is mixed, the source of the moisture has to be found.
The Virginia Department of Historic Resources makes the point in its handbook for owners of historic homes. It compares building care to caring for a patient: identify and address the source of the problem before applying a bandage. It adds that natural materials must be allowed to breathe, so airborne moisture can pass through and evaporate.
Common moisture pathways we look for on brick homes and commercial buildings:
- Worn or open mortar joints that let rain into the wall
- Failed flashing, caps or copings at chimneys and parapets
- Gutters and downspouts that dump water against the wall
- Soil or paving built up against the foundation
- Rising damp, where moisture is drawn up from the ground by capillary action
The UMWHISP materials guide explains that rising damp can be addressed with a damp-proof course just above ground level, advised by a knowledgeable preservation architect or engineer. For structural questions like that, we work alongside the right professionals. Our structural brick and masonry repairs cover walls that have cracked or shifted because of long-term water damage.
Repointing with lime mortar
Repointing, often called tuckpointing, is the most common restoration method and the one that matters most for old brick. It means removing deteriorated mortar from the joints and filling them with new mortar. If you want the background on the terminology, see our explainer on what tuckpointing means. Done well, it stops water entry and returns the wall to a uniform look.
Why the mortar matters more than anything
Old Richmond brick was laid in lime mortar. The AIA Virginia webinar on masonry restoration describes lime mortar as a cushion: it flexes with the brick's movement and lets moisture migrate out of the wall. Modern Portland cement mortars lack that permeability and flexibility, so the face of the brick ends up doing all the expanding and contracting during freeze-thaw cycles.
The result is spalling, where the face of the brick flakes off. NPS Preservation Brief 2 says repointing mortar should be softer or more permeable than the masonry units and no harder or more impermeable than the historic mortar. The Brick Industry Association adds in its maintenance guide that repointing mortar should be equal to or lower in compressive strength than the original, to avoid spalling of the brick face.

That is why we use traditional lime mortar. It is the material old brick was built with, and it protects the brick by taking the wear itself. Our guides on matching mortar to brick and Type N versus Type S mortar go deeper on why a stronger mix can harm older brick.
What the lime mix looks like
Mortar is a mix of binder, sand and water. In traditional work the binder is lime. The City of Smithfield, Virginia, in its building materials chapter, says replacement mortar for older brick buildings should be primarily lime (one part) and sand (two parts). Portland cement, if used at all, should be no more than 20 percent of the lime and cement combined.
For historic buildings, NPS Preservation Brief 2 calls for lime conforming to ASTM C 207 Type S or Type SA. The Brick Industry Association describes Type K as reserved for historic masonry: one part portland cement, four parts hydrated lime and fifteen parts fine sand. It recommends Type N for most modern work and Type O where a higher cement content would be too strong.
| Mortar type | Typical use | Notes |
|---|---|---|
| Type K | Historic masonry | 1 part portland cement, 4 parts hydrated lime, 15 parts fine sand |
| Type O | Where more cement may be too strong | Lower strength than N |
| Type N | General modern applications | Generally recommended for modern work |
| Lime and sand | Older brick buildings | About 1 part lime to 2 parts sand, cement no more than 20 percent of the binder |
Color and texture count too. Sand size, sand color and the tooled joint profile all change how the finished wall looks. Before we repoint a historic wall, we study the existing mortar. Our article on historic mortar analysis explains what that tells us.
How the joints are cut and filled
The steps follow established preservation practice:
- Remove old mortar by hand. NPS Preservation Brief 2 specifies hand chisels and mash hammers, to a depth of 2 to 2-1/2 times the joint width, about 1/2 to 1 inch for most brick joints. The UMWHISP guide warns that electric saws or hammers will damage the masonry.
- Clean and dampen the joint. Dust and loose bits are removed so the new mortar bonds.
- Fill in layers. The NPS brief calls for layers of about 1/4 inch, each allowed to harden before the next goes in.
- Tool the joint. The profile is matched to the original so the wall reads as one piece.
- Build a test panel. The NPS says a 3 foot by 3 foot area is usually enough for brickwork to set a standard of work that later sections are judged against.
The IIBEC paper gives a similar depth rule: a uniform depth of at least twice the joint width, generally 3/4 inch, or until sound mortar is reached. Our brick repointing and tuckpointing service follows this hand-tool, lime-based method. If you are unsure whether your wall is due, our guide on when to repoint brick lays out the signs and how urgent each one is.
The UMWHISP guide notes that masonry walls may not need repointing for as long as 50 years. When they do, doing it with the right mortar keeps the next interval long.
Replacing damaged brick
When a brick is cracked through, heavily spalled or missing, repointing alone is not enough. The unit is replaced. The International Masonry Institute notes that damaged brick is commonly replaced during restoration rather than repaired in place. The goal is a brick that matches the original in appearance and in strength, density, porosity and water absorption.

That last part is easy to miss. If the new brick is much stronger and denser than a soft old wall, it can cause premature failures nearby. Matching is a matter of performance, not just color.
The Brick Industry Association outlines the process in its maintenance guide:
- Remove the damaged brick and surrounding mortar without harming adjacent brickwork
- Clear debris and dampen the surfaces
- Butter the surrounding brick and the replacement brick with mortar
- Center the new brick in the opening and press it into place
- Remove excess mortar and point around it for full head and bed joints
- Tool the joints to the original profile once the mortar is thumbprint hard
Some smaller defects have gentler fixes. The City of Redlands historic design guidelines list options such as filling cracks with color-matched mortar, pinning cracked units back together, patching spalled portions with color-matched patching mortar and resetting loose units. Replacement units, they say, must match the existing masonry in type, color, texture, size, shape, bonding pattern and compressive strength.
Our brick repair service uses these methods, always matching the existing brick and mortar so the repair blends in.
Cleaning brick the gentle way
Cleaning is part of restoration, and it is where well-meaning work does the most harm. NPS Preservation Brief 6 says careful testing should come first and historic buildings should be cleaned by the gentlest means possible. Abrasive methods are generally not acceptable.
The NPS guide on removing dirt, paint and stains names four principal water-washing approaches:
- Soaking, by misting and spraying
- Low- and medium-pressure water washing
- Low- and medium-pressure washing with non-ionic detergents
- Steam cleaning
It calls mechanical or abrasive procedures such as sandblasting, grinding or chiseling unacceptable on historic masonry because they can strip the outer surface layer. The NPS restoration guide goes further and says sandblasting should never be used, since it permanently removes an original protective layer. It recommends low-pressure water and non-acidic detergents applied by hand with natural bristle brushes.
On pressure, the UMWHISP guide suggests a low-pressure wash of 600 to 1000 psi with detergents and natural bristles, and notes that some old bricks are too soft to clean at all without damage. Smithfield's guidelines add that chemical cleaners should be used cautiously and not left on longer than recommended.
For Richmond owners, the takeaway is simple: a pressure washer set too high can undo a century of brick. We cover this in detail in our piece on pressure washing risks, and our guides to preservation-first brick cleaning and safe cleaning steps explain how we approach it.
Cracks, sealants and water repellents
Some methods deal with water entry directly. Cracks in masonry units and mortar joints can be routed and sealed. Sealant is used at joints between different materials and at upward-facing joints. Localized flashing can redirect water inside the wall.
Water repellents need care on historic brick. The IIBEC paper says that only products that permit evaporation and the passage of water vapor, such as siloxanes and silanes, should typically go on exterior masonry. It also says repellents typically do not protect at cracks, and must be reapplied at regular intervals of about 5 to 10 years. In other words, a repellent works as a finishing layer on sound masonry, not as a substitute for repointing.
Chimneys, steps, patios, walkways and retaining walls
The same principles carry over to the rest of a Richmond property. Each element faces its own kind of exposure.
- Chimneys sit at the roofline, take the most weather and often show open joints, loose brick at the crown and failed flashing. Restoration combines repointing, brick replacement and attention to the points where water enters. See our chimney repair page.
- Brick steps wear from foot traffic and water. Loose treads, crumbling risers and settled steps are rebuilt or repaired with matching brick. See brick steps and step repair.
- Patios and walkways depend on a stable base and good drainage, so that water does not undermine the paving. See our patios and walkways work.
- Foundations and retaining walls carry load and hold back soil and water. Cracking, bulging or open joints call for structural attention, covered under our structural repairs.
If you are planning something new rather than a restoration, such as a brick porch, wall or garden feature, our new brickwork service builds it with the same traditional methods.
Restoring historic brick in Richmond, Virginia
Richmond has one of the largest collections of historic brick in the state. Row houses and mansions in the Fan District, the Museum District and along Monument Avenue were built with soft brick and lime mortar, and that shapes every decision about how to restore them.
If your property is in a local historic district, the city's review rules may apply to exterior work. The City of Richmond's Commission of Architectural Review Homeowner's Guide is the place to check, for example on windows and trim, where it states that replacements must match the original design and dimension. For rehabilitation projects, VDHR's handbook explains that the Secretary of the Interior's Standards are applied reasonably, with economic and technical feasibility in mind.
For masonry, those standards point the same way we already work: repair rather than replace, match what is there and use compatible materials. Our page on historic brick repair in the Fan and Museum District covers the neighborhoods we know best, and our article on historic brick restoration explains why we repair first and replace last.
Our point of view on restoration
We have worked on brick in Richmond for over 25 years, and the lesson we repeat most is this: old brick fails when it is repaired with materials that are stronger than it is.
A hard cement mortar looks durable on the day it is finished. In a wall built for lime, it traps moisture and pushes the stress into the face of the brick. That is why we repoint with traditional lime mortar, cut the joints out by hand and match the existing brick and mortar on every job. The repair should disappear into the wall and last for decades.
We would rather tell you the cause of the damage than sell you a patch. Water getting in, joints crumbling, a crack that keeps coming back: each has a reason, and the right method follows from it. That is how we stand behind our 5-year guarantee on materials and workmanship.
Thomas
Get your brick looked at by Richmond masons
Heritage Masonry & Brick is a family-run company of traditional masons serving homes and businesses in Richmond, VA. We repair brick, repoint with lime mortar, restore chimneys, rebuild steps and build new patios and walkways, matching the existing brick and mortar every time.

We offer free estimates, a 5-year guarantee on materials and workmanship, no deposits and payment upon completion. Explore our masonry restoration services or call 804-324-6304 today.
FAQ
What is the difference between masonry repair and masonry restoration?
Repair fixes a local problem such as a loose brick or a cracked joint. Restoration is wider: it finds the cause of the damage, often moisture, and combines methods like repointing, brick replacement, cleaning and water control. On a historic Richmond building, restoration also means matching the original materials.
Why is lime mortar used on old brick?
Lime mortar is softer and more permeable than cement mortar. It flexes with the wall and lets moisture escape, so the brick face does not take the strain of freeze-thaw cycles. Preservation guidance from the National Park Service says repointing mortar should be no harder than the historic mortar.
How deep should old mortar be removed for repointing?
Preservation guidance generally calls for removal to about 2 to 2-1/2 times the joint width, roughly 1/2 to 1 inch for most brick joints, or until sound mortar is reached. It should be done by hand with chisels so the brick edges are not damaged.
Can brick be sandblasted to clean it?
No. The National Park Service says sandblasting and other abrasive methods are not acceptable on historic masonry because they strip the protective outer surface. Low-pressure water and non-acidic detergents applied with natural bristle brushes are the recommended approach, after a test patch.
How do I know if my Richmond brick needs restoration?
Look for crumbling or recessed mortar joints, cracks, flaking brick faces, damp patches inside and loose bricks at chimneys or steps. We offer free estimates, so you can have a Richmond mason look at the wall and explain what it needs.
Sources
- Brick by Brick: Traditional and Unconventional Masonry Restoration Strategies (IIBEC)
- Restoration Guide for Historic Masonry Buildings (National Park Service)
- Handbook for Owners of Virginia Historic Homes (Virginia Department of Historic Resources)
- Materials (UMWHISP)
- Virginia Masonry Restoration webinar (AIA Virginia)
- Preservation Brief 2: Repointing Mortar Joints in Historic Masonry Buildings (National Park Service)
- Maintenance of Brick Masonry (Brick Industry Association)
- Brick Restoration (International Masonry Institute)
- Historic Architectural Design Guidelines (City of Redlands)
- Preservation Brief 6: Dangers of Abrasive Cleaning to Historic Buildings (National Park Service)
- Keeping It Clean: Removing Exterior Dirt, Paint, Stains and Graffiti (National Park Service)
- Commission of Architectural Review Homeowner's Guide (City of Richmond)
